User Manual Q&AAnswer
Dec 22, 2024 - 10:34 PM
To connect the battery to the APC BR1500MS2 Back-UPS Pro, please follow these steps:
1. Lay the UPS with the battery door facing up.
2. Press the locking tabs downwards and pull the battery door away from the unit to access the battery modules.
3. Using the handles on both sides of the battery, lift the battery 30 degrees upward to expose the battery connector. Connect the red wire as shown in the manual.
4. Push the battery into the unit.
5. Replace the battery door.
Please refer to the "Connect the Battery" section in the APC BR1500MS2 Back-UPS Pro User Manual for visual illustrations and additional information.
Add New Comment