User Manual Q&AAnswer
Dec 22, 2024 - 10:25 PM
Adjusting the voltage and current settings on the Jesverty SPS3010 DC Power Supply is a straightforward process. Here are the step-by-step instructions:
1. Turn on the power supply by using the main power switch.
2. Locate the voltage xxxx and the current xxxx on the front panel of the power supply.
3. To adjust the voltage, turn the voltage xxxx either clockwise or counterclockwise. Turning it clockwise will increase the voltage, while turning it counterclockwise will decrease the voltage. The voltage can be adjusted in both coarse and fine increments.
4. To adjust the current, turn the current xxxx in the same manner. Turning it clockwise will increase the current, while turning it counterclockwise will decrease the current. The current can also be adjusted in both coarse and fine increments.
5. Monitor the voltage and current readings on the 4-digit LED display to ensure they match your desired settings.
6. Fine adjustments can be made by using the fine adjustment knobs located next to the voltage and current knobs.
7. Remember to stay within the maximum voltage and current limits of the power supply to avoid overloading.
Please refer to the Jesverty SPS3010 DC Power Supply Operating Manual for more detailed information and illustrations on adjusting the voltage and current settings.
Add New Comment