User Manual Q&AAnswer
Dec 22, 2024 - 10:21 PM
To replace the bulb in your Collections Etc PYT018 Christmas Tree Night Light, please follow these step-by-step instructions:
1. Unplug the night light: Before replacing the bulb, make sure the night light is unplugged from the power source to avoid any electrical accidents.
2. Allow the night light to cool down: Give the night light some time to cool down before attempting to replace the bulb. This will prevent any burns or injuries.
3. Locate the bulb base: The bulb base is located at the bottom of the night light. It is a GX5.3 base, specifically designed for incandescent bulbs.
4. Unscrew the old bulb: Gently twist the old bulb counterclockwise to remove it from the bulb base. Be careful not to apply too much force to avoid damaging the bulb or the base.
5. Dispose of the old bulb properly: Once the old bulb is removed, dispose of it properly according to your local regulations for safe disposal of incandescent bulbs.
6. Insert the new bulb: Take a new GX5.3 incandescent bulb and align the pins on the base with the slots in the bulb base. Insert the bulb into the base and twist it clockwise until it is securely in place.
7. Test the new bulb: Plug the night light back into the power source and turn it on to test the new bulb. Make sure it lights up properly and emits a warm and soothing glow.
Note: It is important to use a bulb with the same type (GX5.3) and wattage (5 watts) as the original bulb to ensure compatibility and optimal performance.
If you encounter any difficulties or have further questions, please consult the user manual provided with the product or contact Collections Etc customer support for assistance.
Add New Comment