User Manual Q&AAnswer
Dec 22, 2024 - 10:20 PM
Cleaning the SunJet 4-Tier Desktop Water Fountain is important to maintain its performance and appearance. Here is a step-by-step guide on how to clean the fountain:
1. Unplug the fountain: Before cleaning, make sure to unplug the fountain from the power source to ensure safety.
2. Drain the water: Remove any remaining water from the fountain by carefully pouring it out or using a small container.
3. Disassemble the fountain: If possible, disassemble the fountain by removing each tier and the pump. Follow the instructions in the manual for disassembly.
4. Clean the tiers: Clean each tier separately using a mild soap and water solution. Gently scrub the surfaces to remove any dirt or debris. Rinse thoroughly with clean water.
5. Clean the pump: If the pump is dirty or clogged, clean it by removing any debris or buildup. Refer to the manual for specific instructions on cleaning the pump.
6. Rinse all components: After cleaning, rinse all the components, including the tiers and pump, with clean water to remove any soap residue.
7. Dry the fountain: Allow all the components to air dry completely before reassembling the fountain. Make sure there is no moisture left to prevent mold or damage.
8. Reassemble the fountain: Once all the components are dry, reassemble the fountain by placing each tier back in its designated position. Follow the instructions in the manual for proper reassembly.
9. Refill with water: Fill the fountain with clean water to the recommended level. Make sure the pump is fully submerged in the water.
10. Plug in and test: Plug the fountain back into the power source and turn it on to test its operation. Ensure that the pump runs silently and the water flows smoothly.
Regular cleaning of the SunJet 4-Tier Desktop Water Fountain will help maintain its performance and prolong its lifespan. Refer to the "Care & Maintenance" section of the user manual for more detailed instructions and tips on maintaining the fountain.
Add New Comment