User Manual Q&AAnswer
Dec 22, 2024 - 10:01 PM
Cleaning the BBabe DZD-7497 Water Fountain is an essential part of maintenance to ensure optimal performance and longevity. Here are the steps to clean the fountain effectively:
1. Unplug the fountain: Before starting the cleaning process, make sure to unplug the fountain from the power source to ensure safety.
2. Empty the water: Carefully remove any remaining water from the fountain. You can use a small container or a siphon to remove the water.
3. Disassemble the fountain: If possible, disassemble the fountain by removing any removable parts such as tiers or decorative elements. Refer to the user manual for specific instructions on disassembly.
4. Clean the fountain base: Using a soft cloth or sponge, wipe the fountain base to remove any dirt, debris, or algae buildup. You can use mild soap or a specific fountain cleaning solution diluted in water for stubborn stains. Avoid using harsh chemicals that may damage the polyresin material.
5. Clean the pump: Remove the pump from the fountain base and inspect it for any debris or clogs. Gently clean the pump using a soft brush or cloth to remove any dirt or buildup. Ensure that the impeller is free from any obstructions.
6. Rinse and dry: Rinse all the fountain components thoroughly with clean water to remove any cleaning solution residue. Allow the parts to air dry completely before reassembling the fountain.
7. Reassemble and refill: Once all the components are dry, reassemble the fountain according to the user manual instructions. Fill the fountain base with clean water, ensuring that the water level is sufficient for the pump to operate properly.
8. Plug in and test: Plug the fountain back into the power source and turn it on to test the water flow and LED lights. Monitor the fountain for any unusual noises or issues.
Regular cleaning every few weeks or as needed will help maintain the performance and appearance of your BBabe DZD-7497 Water Fountain.
Add New Comment