User Manual Q&AAnswer
Dec 22, 2024 - 09:59 PM
Installing the SYLVANIA 13545 Night Light Bulb is a simple process. Here are the step-by-step instructions:
1. Make sure the power is turned off: Before installing or removing any light bulb, always ensure that the power to the fixture is turned off. This will prevent any electrical accidents.
2. Remove the old bulb (if applicable): If there is an existing bulb in the fixture, carefully unscrew and remove it from the socket.
3. Prepare the SYLVANIA 13545 bulb: Take the SYLVANIA 13545 Night Light Bulb out of the packaging. Ensure that the bulb is intact and free from any damages.
4. Align the bulb with the socket: Hold the bulb by its base and align the threaded part of the bulb with the socket in the fixture. The SYLVANIA 13545 bulb has a standard E12 base, which should fit most fixtures.
5. xxxx the bulb into the socket: Gently twist the bulb clockwise into the socket until it is securely in place. Be careful not to overtighten, as this could damage the bulb or the fixture.
6. Turn on the power: Once the bulb is securely installed, you can turn on the power to the fixture. The SYLVANIA 13545 Night Light Bulb should now be illuminated and ready for use.
Note: If the bulb does not light up after installation, double-check that it is securely screwed in and that the power to the fixture is turned on. If the issue persists, refer to the troubleshooting section in the user manual or contact customer support for further assistance.
For more detailed instructions and safety precautions, please refer to the user manual provided with the SYLVANIA 13545 Night Light Bulb.
Add New Comment