User Manual Q&AAnswer
Dec 22, 2024 - 09:50 PM
To install the DOMICA AM-126 Submersible Water Pump in your aquarium, please follow these step-by-step instructions:
1. Unpack the Pump: Carefully remove the pump and its accompanying parts from the packaging, checking for any visible damage.
2. Choose the Placement: Decide where you want to position the pump in your aquarium.
3. Submerge the Pump: Before turning on the pump, ensure that it is fully submerged in water to prevent any damage.
4. Attach Suction Cups: Place the three suction cups on a clean and level surface inside the aquarium, and secure the pump to them.
5. Install the Hose (if applicable): If you are using a hose with the pump, make sure it is securely attached to the pump.
6. Adjust the Flow Rate: Use the flow rate adjustment xxxx to set the desired water flow. This allows you to personalize the water flow according to your needs.
7. Connect the Power: Plug the pump's power cord into a suitable electrical outlet using the provided US standard plug.
8. Perform a Leak Check: Check for any leaks around the hose connections to ensure a proper seal.
9. Check the Water Height: Verify that the pump can raise the water to the desired height, up to a maximum of 2.5 feet.
10. Ensure Cord Safety: Keep the power cord away from any bodies of water to avoid safety risks.
11. Observe Pump Operation: Monitor the pump for a few minutes to ensure it is operating silently and smoothly.
12. Adjust Pump Position (if necessary): If you notice any issues with water flow or performance, you may need to adjust the pump's position to optimize its performance.
13. Check for Air Bubbles: If you experience reduced performance, check for air bubbles in the water intake area, as they can affect the pump's efficiency.
14. Regular Maintenance: Periodically check the suction cups and connectors to ensure they remain secure.
15. Power Down for Maintenance: Always unplug the pump before performing any repairs or cleaning.
By following these installation instructions, you should be able to properly install the DOMICA AM-126 Submersible Water Pump in your aquarium and enjoy its reliable water circulation capabilities. For further details and safety precautions, please refer to the instruction manual provided with the product.
Add New Comment