User Manual Q&AAnswer
Dec 22, 2024 - 09:49 PM
To set up the AgiiMan XD-80B Submersible Pump, follow these steps:
1. Unpacking: Take the pump and any included parts out of the package. Verify every component to make sure nothing is broken.
2. Placement: Set the pump where the water needs to be drained or where you want the pool cover to be.
3. Linking the Hose: Connect the 16-foot drainage hose to the outlet of the pump. Make sure it's firmly fastened to stop leakage.
4. Choosing Nozzles: Based on your drainage requirements, select the suitable nozzle (1/2", 3/4", or 3/4" curved) and fasten it to the hose.
5. Connect the 25-foot power wire to an appropriate AC socket for electricity. Make sure there is no water exposure to the socket.
6. First Check: Make sure there are no obvious leaks or damages and that all connections are tight.
7. Power On: Activate the pump and watch it operate to make sure everything is functioning properly.
8. Hose Adjustment: Set the hose's end in the desired drainage location to direct water flow.
9. Monitoring: Make sure the pump is operating well and keep an eye out for any possible problems by checking it on a regular basis.
10. Temperature Control: To prevent harming the pump, make sure the water temperature does not rise above 95°F.
11. Screen Inspection: Inspect the mesh screens for obstructions and, if required, clean them.
12. Dry Running: To avoid damaging the pump, do not operate it without water.
13. Safety Advice: To prevent electrical risks, make sure the power cable and connections are not submerged in water.
14. Regular Maintenance: To guarantee peak performance, clean and inspect the pump on a regular basis.
15. Storage: To extend the life of the pump, store it in a dry, cool area if it won't be used for an extended amount of time.
For more detailed instructions and safety precautions, please refer to the AgiiMan XD-80B Submersible Pump Instruction Manual.
Add New Comment