User Manual Q&AAnswer
Dec 22, 2024 - 09:47 PM
To adjust the water flow in your Alpine Corporation WIN220 Cascading Tabletop Fountain, follow these steps:
1. Remove the pre-installed pump from the fountain.
2. Locate the flow control on the pump. It is a small xxxx or lever that can be turned or adjusted.
3. Adjust the flow control to the lowest setting to reduce the water flow and minimize splashing.
4. Once the fountain is completely assembled, plug the pump and light cord into your local power supply.
5. Observe the water flow and adjust the flow control as needed to achieve your desired water flow rate.
Note: It may take a few adjustments to find the perfect balance of water flow. Start with the lowest setting and gradually increase if desired. Keep in mind that some splashing may still occur, especially if the fountain is placed on an uneven surface or if the water level is too high. Adjusting the flow control can help minimize splashing, but it may not eliminate it completely.
Add New Comment