User Manual Q&AAnswer
Dec 22, 2024 - 09:44 PM
To adjust the water flow in your Alpine Corporation WCT688 Pump Barrel Fountain, follow these steps:
1. Locate the flow control on the fountain pump. The flow control is a small dial or lever on the pump itself.
2. Turn the flow control to the desired setting. Rotating it clockwise will increase the water flow, while rotating it counterclockwise will decrease the flow.
3. Start with the flow control set to the lowest setting to avoid splashing until the fountain is completely assembled.
4. Once the fountain is assembled, plug in the pump and observe the water flow. If the flow is too weak or too strong, adjust the flow control accordingly until you achieve your desired water flow.
Note: The flow control may be located on the side or bottom of the pump, depending on the model. Refer to the owner's manual for specific instructions and illustrations related to your fountain model.
Add New Comment