User Manual Q&AAnswer
Dec 22, 2024 - 09:39 PM
To adjust the flow of water in the Alpine Corporation WIN794S Tabletop Fountain, follow these steps:
1. Locate the flow control on the pump. The flow control is a dial or xxxx that allows you to adjust the water flow rate.
2. Before adjusting the flow, make sure the fountain is completely assembled and the pump is running.
3. Turn the flow control to the lowest setting initially to avoid splashing. You can gradually increase the flow to your preference by turning the dial or xxxx clockwise.
4. Observe the water flow and adjust the flow control until you achieve the desired water flow rate.
Note: It is recommended to start with the lowest setting and gradually increase the flow to prevent splashing or overflowing. Adjusting the flow control can help you customize the water flow according to your preference and the environment.
For further assistance or troubleshooting, refer to the Alpine Corporation WIN794S Tabletop Fountain Owner's Manual.
Add New Comment