User Manual Q&AAnswer
Dec 22, 2024 - 09:33 PM
Setting the temperature and time on the VEVOR HP1215 heat press machine is a straightforward process. Here are the step-by-step instructions:
1. Preparation: Before using the machine, check the connection between the power plug and electrical socket of the electrical cabinet. Ensure that you operate with a safe ground wire.
2. Set the Initial Temperature: Press the "MODE" button once to see the "set light" turning red. Then, press the "plus/minus key" to set the initial heating temperature. The temperature range is 200-450°F.
3. Set the Highest Temperature: Press the "MODE" button for the second time to see the "temperature light" turning red. Press the "plus/minus key" to set the highest heating temperature. The temperature range is 200-450°F.
4. Set the Proper Heating Time: Press the "MODE" button for the third time to see the "time light" turning red. Press the "plus/minus key" to set the proper heating time. The time range is 0-999 seconds.
5. Finish the Setting and Standby: Press the "MODE" button for the fourth time to finish the setting. The set light will be on, and the temperature will continue to rise. When the set maximum temperature is reached, the countdown starts. After the countdown ends, a "BEEF" sound will be emitted, the indicator light will turn off, and the operation is complete. The machine will then be in standby mode.
It is important to note that the specific temperature and time settings may vary depending on the material you are working with. The user manual provides a table with recommended temperature and time settings for different objects such as mugs, tiles, metal boards, plates, and T-shirts. Refer to this table to ensure proper heating for your specific project.
Remember to turn off the power and wait for the machine to cool down before removing clothes or other objects. Always exercise caution and wear heat-resistant gloves when handling hot materials.
Add New Comment