User Manual Q&AAnswer
Dec 22, 2024 - 09:22 PM
To program Botley to move forward, follow these steps:
1. Slide the POWER switch on the bottom of Botley to the CODE position.
2. Place Botley on a hard surface, such as the floor.
3. Press the FORWARD arrow button on the Remote Programmer.
4. Point the Remote Programmer at Botley and press the transmit button.
5. Botley will light up, make a sound to indicate the program has been transmitted, and move forward one step.
Note: If you hear a negative sound after pressing the transmit button, try pressing the TRANSMIT button again. Make sure the POWER switch on the bottom of Botley is in the CODE position, and check the lighting of your surroundings. Bright light can affect the way the Remote Programmer works. Also, make sure to point the Remote Programmer directly at Botley and bring it closer if needed.
Add New Comment