User Manual Q&AAnswer
Dec 22, 2024 - 09:19 PM
To connect the Waysse 1250 Power Supply Adapter to your device, please follow these steps:
1. Plug the power cord into the adapter: Take the power cord included in the package and insert one end into the designated port on the adapter. Ensure that the connection is secure.
2. Connect the other end to your device's power input: Locate the power input port on your device and insert the other end of the power cord into it. Make sure the connection is firm.
3. Power on the adapter: Plug the adapter into a wall outlet that is compatible with the input voltage requirements of the adapter. The input voltage range for the Waysse 1250 Power Supply Adapter is 100-240V AC.
4. Monitor the device: Once the adapter is connected and powered on, check your device to ensure it is receiving power and functioning correctly. You should see the device powering on and operating as expected.
5. Unplug safely: When you are finished using the adapter, it is important to unplug it safely. First, unplug the adapter from the wall outlet, and then disconnect it from your device.
Please note that it is essential to follow the user manual and ensure that the output voltage of your device is 12V and the output current is less than 5A. If the rated power of your device exceeds these specifications, the adapter may not function properly.
Add New Comment