User Manual Q&AAnswer
Dec 22, 2024 - 09:14 PM
Installing the SautDream C7 Night Light is a simple process. Here are the step-by-step instructions:
1. Ensure that your fixture is compatible with E12 candelabra bases. The SautDream C7 Night Light uses a standard E12 candelabra base.
2. Make sure the power is turned off before installation to avoid any electrical hazards.
3. Take the SautDream C7 Night Light bulb and insert it into the socket. Align the base of the bulb with the socket and gently twist it clockwise until it is securely in place. Be careful not to overtighten.
4. Once the bulb is securely in place, turn on the power to test the light. If the bulb does not light up, double-check the connection and make sure it is fully screwed in. If the issue persists, try using a different fixture to ensure the problem is not with the socket.
5. The SautDream C7 Night Light is designed for indoor use only. Avoid using it in damp areas or outdoors to maintain optimal performance and safety.
Following these steps should allow you to successfully install the SautDream C7 Night Light and enjoy its warm and soft lighting in your desired space.
Add New Comment