User Manual Q&AAnswer
Dec 22, 2024 - 09:03 PM
Installing the SUNSGNE C26 Candle Light Bulbs is a simple process. Here are the step-by-step instructions:
1. Ensure the power is off: Before replacing the bulbs, make sure the power to the fixture is turned off. This will prevent any accidents or electrical shocks.
2. xxxx the bulb securely: Take the bulb and xxxx it securely into an E12 candelabra socket. Make sure to turn it clockwise until it is firmly in place.
3. Restore power and test: Once the bulb is installed, restore power to the fixture and test the installation. If the bulb doesn't light up, double-check the connection or try a different bulb to ensure it is not a faulty bulb.
It's important to note that the E12 candelabra base of these bulbs is smaller than the standard E26 medium xxxx base. Therefore, before purchasing or installing the bulbs, double-check the compatibility of the bulb base with your fixture to ensure a proper fit.
If you have any further questions or issues with the installation, please refer to the user manual provided with the product or contact SUNSGNE customer support for assistance.
Add New Comment