User Manual Q&AAnswer
Dec 22, 2024 - 08:23 PM
Installing the STAR-SPANGLED UK-21B-YE3 2.8 Motion Sensor Lights is a simple process. Here are the step-by-step instructions:
1. Prepare the mounting surface: Clean the surface where you plan to install the lights to ensure proper adhesion. Remove any dust, dirt, or debris.
2. Peel off the adhesive backing: Each light comes with a strong adhesive tape on the back. Peel off the protective backing to expose the adhesive.
3. Position the lights: Decide where you want to install the lights. Make sure it is a suitable location within the detection range of the motion sensor.
4. Stick the lights to the surface: Press the lights firmly against the mounting surface, ensuring good contact with the adhesive. Hold it in place for a few seconds to ensure it sticks properly.
5. Test the motion sensor: After installation, test the motion sensor by moving in front of it. The light should turn on automatically when motion is detected.
Note: It is recommended to install the lights at a height of 6-7 feet for optimal motion detection.
For more detailed instructions and troubleshooting tips, please refer to the STAR-SPANGLED UK-21B-YE3 2.8 Motion Sensor Lights User Manual included in the package.
Add New Comment