User Manual Q&AAnswer
Dec 22, 2024 - 08:18 PM
To change the lighting modes on the Joomer GP-SW120DC0600-IP44(US)A Color Changing Christmas Lights, you can use either the remote control or the control button on the light string. Here are the step-by-step instructions:
Using the Remote Control:
1. Ensure that the lights are plugged in and powered on.
2. Point the remote control towards the green controller box (receiver) on the light string.
3. Press the "Mode" button on the remote control to cycle through the available lighting modes.
4. Keep pressing the "Mode" button until you find the desired lighting mode. The different modes include steady glow, flashing, fading, and more.
5. Once you have selected a mode, the lights will start displaying the chosen lighting effect.
Using the Control Button on the Light String:
1. Ensure that the lights are plugged in and powered on.
2. Locate the control button on the light string. It is usually located near the power adapter or at the beginning of the lights.
3. Press the control button to cycle through the available lighting modes.
4. Keep pressing the control button until you find the desired lighting mode.
5. Once you have selected a mode, the lights will start displaying the chosen lighting effect.
Note: The specific modes and their order may vary depending on the model of the Joomer GP-SW120DC0600-IP44(US)A lights. Refer to the user manual for a detailed description of each mode and its corresponding button on the remote control.
If you are still experiencing difficulties changing the lighting modes, please refer to the user manual or contact Joomer customer support for further assistance.
Add New Comment