User Manual Q&AAnswer
Dec 22, 2024 - 10:55 AM
To assemble the ELEGOO V2.0 Owl Smart Robotic Car Kit, follow these step-by-step instructions:
1. Carefully unpack all components of the kit and ensure you have all the necessary parts.
2. Start by assembling the base of the robotic car. Connect the motors to the base using the provided screws and nuts. Make sure they are securely attached.
3. Attach the wheels to the motors. Each motor should have a wheel that fits onto its shaft. Ensure the wheels are properly aligned and securely attached.
4. Install the Arduino-compatible control board onto the base. Use the provided screws to secure it in place.
5. Connect the Bluetooth module to the control board. Follow the instructions in the user manual to ensure the module is properly connected.
6. Attach the ultrasonic sensor to the front of the car. Use the provided screws to secure it in place.
7. Connect the infrared sensors to the sides of the car. Again, use the provided screws to secure them in place.
8. Install the line tracking modules underneath the car. These modules should be positioned in a way that allows them to detect the black line on the track.
9. Insert 6x AA batteries into the battery holder or use the included Lithium Polymer battery to power the car. Ensure the batteries are correctly placed according to the polarity instructions to avoid any power issues.
10. Once all the components are securely attached, double-check all connections and make sure there are no loose wires.
11. Your ELEGOO V2.0 Owl Smart Robotic Car Kit is now assembled and ready for programming and control.
Please refer to the user manual that comes with the kit for more detailed instructions and illustrations.
Add New Comment