User Manual Q&AAnswer
Dec 22, 2024 - 10:26 AM
To clean the FREESEA 660GPH Submersible Water Pump, follow these steps:
1. Turn off the power supply and unplug the pump from the power source.
2. Carefully remove the pump from the water feature or tank.
3. Disassemble the pump by removing the front cover or impeller cover, depending on the model.
4. Rinse the pump components with clean water to remove any debris or dirt.
5. Use a soft brush or cloth to gently scrub the impeller and other parts, if necessary.
6. Inspect the intake and impeller for any blockages and remove them using a small brush or tweezers.
7. Clean the pump housing and any external components to prevent dirt and algae buildup.
8. Once all the components are clean, reassemble the pump by following the reverse order of disassembly.
9. Place the pump back into the water feature or tank, ensuring it is fully submerged.
10. Plug the pump back into the power source and turn it on to check if the water flow has improved.
Regular cleaning and maintenance of the FREESEA 660GPH Submersible Water Pump will help ensure optimal performance and prevent clogging.
Add New Comment