User Manual Q&AAnswer
Dec 22, 2024 - 09:54 AM
To assemble the ELEGOO US-EL-KIT-012 UNO R3 Smart Robot, please follow the detailed instructions provided in the user manual. Here is a step-by-step guide:
1. Start by gathering all the components included in the package, such as the Arduino UNO R3 controller board, Bluetooth module, ultrasonic sensor, line tracking module, motors with wheels, acrylic chassis, and other accessories.
2. Begin assembling the chassis by attaching the acrylic plates together using the provided screws and nuts. Follow the instructions in the manual to ensure proper alignment and stability.
3. Install the motors onto the chassis using the motor brackets and screws. Make sure they are securely attached.
4. Connect the wheels to the motors. The wheels should fit snugly onto the motor shafts.
5. Attach the motor driver board to the chassis using the provided screws. Ensure that it is positioned correctly and securely.
6. Connect the motors to the motor driver board. Follow the instructions in the manual to identify the correct connections.
7. Install the Arduino UNO R3 controller board onto the chassis using the provided screws. Make sure it is properly aligned and secured.
8. Connect the line tracking module, ultrasonic sensor, and Bluetooth module to the Arduino board. Refer to the manual for the specific wiring instructions.
9. Install the battery holder onto the chassis. This will hold the two 18650 rechargeable lithium batteries (not included in the package) that power the robot.
10. Connect the battery holder to the Arduino board, ensuring the correct polarity.
11. Double-check all the connections and make sure they are secure.
12. Once the robot is fully assembled, you can proceed to program it using the Arduino IDE. Install the IDE on your computer and connect the Arduino board via the USB cable included in the package.
13. Use the provided code or write your own to program the robot's functions and behaviors. Upload the code to the Arduino board.
14. Power on the robot by inserting the fully charged 18650 batteries into the battery holder.
15. You can now operate the robot using the infrared remote control or connect via Bluetooth using a smartphone or tablet. Explore different modes such as line following or obstacle avoidance by modifying the code.
Please refer to the detailed user manual for visual illustrations and additional information on the assembly process.
Add New Comment