User Manual Q&AAnswer
Dec 22, 2024 - 09:49 AM
Sure! Here is a step-by-step guide on how to assemble and use the UPETTOOLS Electric Aquarium Gravel Cleaner:
1. Assembly: Start by connecting the hose to the main body of the cleaner. Make sure it is securely attached.
2. Attachments: Depending on your cleaning needs, you can attach either the gravel cleaner or the debris collection bag to the end of the hose. The gravel cleaner is used for cleaning the gravel, while the debris collection bag is used for surface cleaning and removing floating particles.
3. Power On: Plug in the AC adapter and turn on the cleaner using the switch. The cleaner is powered by a corded electric source.
4. Cleaning: Place the gravel cleaner or debris collection bag at the bottom of the tank and move it around to remove debris. Adjust the flow rate using the flow control valve if necessary.
5. Water Change: To change water, adjust the flow rate and direct the outflow hose to a bucket or drain. The cleaner can automatically change the water in your aquarium.
6. Care and Maintenance: After each use, rinse the hose, gravel cleaner, and debris collection bag with fresh water to remove any debris. Store the cleaner in a dry place, away from direct sunlight and moisture. Periodically inspect the hose and cleaner attachments for any blockages or buildup. Replace worn-out parts as needed to maintain optimal performance.
Please refer to the UPETTOOLS Electric Aquarium Gravel Cleaner user manual for more detailed instructions and safety precautions.
Add New Comment