User Manual Q&AAnswer
Dec 22, 2024 - 09:27 AM
To set the feeding schedule on your Noodoky Automatic Fish Feeder, please follow these step-by-step instructions:
1. Power on the feeder by pressing and holding the "Power" button for 3 seconds.
2. To set the feeder clock, press and hold the "Set" button for 3 seconds. When the HOUR number starts to flicker, use the "+" or "-" button to set the desired hour. Press the "Set" button again to move to the MINUTE setting. Use the "+" or "-" button to set the desired minute. Press the "Set" button to confirm the clock setting.
3. After setting the clock, you can proceed to set the feeding time and feeding cycle number. Press the "Set" button again. The HOUR number will flicker with the first box. Adjust the feeding hour time using the "+" or "-" button. Press the "Set" button to confirm. The MINUTE number will then flicker with the first box. Adjust the feeding minute time using the "+" or "-" button. Press the "Set" button to confirm. The first box will then flicker. Choose the number of rotating circles of the feeder drum by pressing the "+" or "-" button (1 is 1 cycle, 2 is 2 cycles, 3 is 3 cycles, empty is 0 cycle). Press the "Set" button to confirm.
4. Repeat step 3 for the second, third, and fourth boxes to set additional feeding times and cycles.
5. When you have finished setting the feeding schedule, press the "Set" button to save and exit. Alternatively, you can press the "Manual" button at any step to save the current setting and exit.
By following these steps, you will be able to program your to feed your fish at specific times throughout the day according to your desired schedule.
Add New Comment