How do I set up the Alpine Corporation WCT202 Tiered Column Tabletop Fountain? (Alpine Corporation Tiered Column Tabletop Fountain Owner’s Manual)

Answer

manuals.plus

Dec 22, 2024 - 06:06 AM

Sure! Here are the step-by-step instructions for setting up the Alpine Corporation WCT202 Tiered Column Tabletop Fountain:

1. Unpack all the components carefully and ensure that all parts have been removed from the packaging.

2. Place the Fountain Base on a smooth and level surface, leaving enough space to access the pump.

3. Remove the pump from its packaging and adjust the flow control to the lowest setting to avoid splashing until the fountain is completely assembled.

4. Connect the vinyl tubing from the bottom of the Fountain Top to the hose bib on the pump.

5. Place the Fountain Top onto the Fountain Base.

6. Gently pour water into the fountain basin, being careful not to overflow and cause splashing. Make sure the water completely submerges the pump and runs clear during operation. It is recommended to use distilled water to prevent scale build-up.

7. Plug the pump cord into a standard household power supply. Ensure that there is no water around the plug and always keep the power source in a dry place.

8. Adjust the water pump to your desired flow preference. Once set, replace the Fountain Top. Add tea candles to the three designated housings. Place the rocks in your desired location around the Fountain Base.

9. Congratulations, your fountain is now complete! Remember to add water regularly as it will evaporate over time. Sit back, relax, and enjoy your new fountain.

If you encounter any issues or have further questions, please refer to the Alpine Corporation WCT202 Tiered Column Tabletop Fountain Owner's Manual for troubleshooting tips or contact the retail store where you purchased the fountain for assistance.