User Manual Q&AAnswer
Dec 22, 2024 - 05:30 AM
Loading staples into the Arrow T50ACD Corded Electric Staple Gun is a simple process. Here are the step-by-step instructions:
1. Ensure that the tool is unplugged or powered off for safety.
2. Turn the tool upside down and locate the pusher assembly.
3. Squeeze the pusher assembly and pull it out until it stops, revealing the staple magazine.
4. Place the staples into the magazine with the points facing up and out of the tool.
5. Never attempt to completely remove the pusher assembly as this may damage the tool and void the warranty.
6. Close the pusher assembly until it snaps into place.
7. Your Arrow T50ACD Corded Electric Staple Gun is now loaded and ready to use.
Please refer to the user manual for visual illustrations and additional information on loading staples into the tool.
Add New Comment