User Manual Q&AAnswer
Dec 22, 2024 - 05:14 AM
To change the blade on the ZMOL 029 Electric Pencil Sharpener, please follow the instructions below:
1. Ensure that the sharpener is turned off and unplugged from any power source.
2. Open the shavings container by gently pulling it away from the sharpener body.
3. Locate the blade holder inside the sharpener. It is the part that holds the blade in place.
4. Carefully remove the blade holder by pulling it out from the sharpener body. Be cautious not to touch the blade, as it may be sharp.
5. Once the blade holder is removed, you can easily access the blade. Take note of the orientation of the blade before removing it to ensure proper installation of the new blade.
6. To remove the old blade, gently push it out from the blade holder using your finger or a small tool.
7. Insert the new blade into the blade holder, aligning it with the grooves or slots provided.
8. Carefully slide the blade holder back into the sharpener body, ensuring that it is securely in place.
9. Close the shavings container by pushing it back onto the sharpener body until it clicks into place.
10. Your ZMOL 029 Electric Pencil Sharpener is now ready to be used with the new blade.
Note: It is recommended to refer to the user manual for detailed instructions and illustrations on blade replacement. If you encounter any difficulties or have further questions, please contact the manufacturer's customer support for assistance.
Add New Comment