User Manual Q&AAnswer
Dec 22, 2024 - 04:39 AM
Adjusting the pressure on the Delclynee HPM-1515-1 High-Pressure Heat Press Machine is a simple process. Here are the step-by-step instructions:
1. Start by turning on the heat press machine and allowing it to preheat to the desired temperature.
2. Once the machine is preheated, locate the pressure adjustment xxxx . This xxxx is usually located on the top of the machine near the handle.
3. To increase the pressure, turn the xxxx clockwise. To decrease the pressure, turn the xxxx counterclockwise.
4. It is important to adjust the pressure according to the thickness and type of material you are using. For thicker materials, such as sweatshirts or canvas bags, you may need to increase the pressure. For thinner materials, such as t-shirts or mouse pads, you may need to decrease the pressure.
5. It is recommended to start with a lower pressure setting and gradually increase it until you achieve the desired results. This will help prevent any damage to the material.
6. Once you have adjusted the pressure, close the heat press machine and proceed with the pressing process as instructed in the user manual.
Note: It is important to ensure that the pressure is evenly distributed across the entire heat platen for optimal heat transfer. The Delclynee HPM-1515-1 High-Pressure Heat Press Machine is equipped with an automatic floatation feature that helps to apply even pressure on uneven or thicker substrates. This feature ensures consistent results regardless of the thickness of the item being pressed.
Add New Comment