User Manual Q&AAnswer
Dec 22, 2024 - 04:36 AM
Setting the temperature and time on the VEVOR 1215PB2 heat press machine is a straightforward process. Here's a step-by-step guide:
1. Power On: Make sure the machine is plugged into a 110V outlet and turn it on using the control panel.
2. Select Temperature: Use the arrow buttons on the control panel to adjust the temperature. The digital LCD screen will display the current temperature setting.
3. Set Temperature: Press the "Set" button on the control panel to enter the temperature setting mode. Use the arrow buttons to increase or decrease the temperature according to the requirements of your transfer material.
4. Select Time: Use the arrow buttons to adjust the time setting. The digital LCD screen will display the current time setting.
5. Set Time: Press the "Set" button to enter the time setting mode. Use the arrow buttons to increase or decrease the time based on the recommended transfer time for your material.
6. Start Heat Transfer: Once you have set the desired temperature and time, wait for the machine to reach the set temperature before placing your material on the heat plate.
7. Monitor the Process: The digital LCD screen will display the remaining time during the heat transfer process. Keep an eye on the screen to ensure the transfer is completed within the set time.
8. Remove the Item: Once the timer goes off, carefully open the arm and remove your item from the heat plate. Allow it to cool before handling.
Note: It is important to refer to the user manual for specific temperature and time recommendations based on the materials you are using. Different materials may require different settings for optimal heat transfer.
For further assistance or troubleshooting, you can refer to the VEVOR 1215PB2 8-in-1 Heat Press Machine user manual or contact VEVOR customer support through email at support@vevor.com or by phone at +1 (800) 123-4567.
Add New Comment