User Manual Q&AAnswer
Dec 22, 2024 - 04:32 AM
To empty the transparent chip tray on the AFMAT Electric Three Hole Punch, follow these steps:
1. Ensure that the hole puncher is turned off and unplugged from the power source.
2. Locate the transparent chip tray at the bottom of the puncher.
3. Carefully lift the chip tray upwards to detach it from the puncher.
4. Empty the paper waste from the chip tray into a waste bin or recycling container.
5. If there is any paper waste stuck in the puncher, you can use your fingers or a small tool to remove it.
6. Once the chip tray is empty and the puncher is free from any debris, reattach the chip tray by aligning it with the puncher and pressing it firmly until it clicks into place.
7. Ensure that the chip tray is securely attached before using the hole puncher again.
Regularly emptying the chip tray is important to maintain optimal performance and prevent any potential issues with the punching process. It is recommended to empty the chip tray before it becomes too full to avoid any paper waste overflowing and affecting the puncher's functionality.
Add New Comment