User Manual Q&AAnswer
Dec 22, 2024 - 04:17 AM
To pair the Amicool G03080R Remote Control Car with the remote control, please follow these steps:
1. Make sure both the car and the remote control are turned on and within range of each other.
2. Turn on the car's lights by pressing the corresponding button on the car.
3. Turn on the remote control by pressing the power button.
4. Press and hold the power button on the remote control until the car starts to move or the lights on the car flash.
5. Once the car is running, press the power button on the remote control again to complete the pairing process.
6. The car and remote control should now be paired and ready to use.
If the car and remote control do not pair successfully, try the following troubleshooting steps:
- Make sure both the car and the remote control have fresh batteries installed.
- Ensure that the car and the remote control are on the same frequency.
- Move closer to the car to ensure a strong signal.
- Check for any interference from other electronic devices.
If you are still experiencing issues with pairing, please refer to the user manual for further troubleshooting steps or contact customer support for assistance.
Add New Comment