User Manual Q&AAnswer
Dec 22, 2024 - 04:09 AM
Sure! Here is a step-by-step guide on how to use the XUJXHH AN-1 1500W Travel Garment Steamer:
1. Fill the Water Tank: Use the measuring cup provided to fill the water tank with water. Make sure not to exceed the maximum fill line indicated on the tank.
2. Plug In: Connect the steamer to a power outlet and turn it on using the power switch.
3. Wait for Heating: Allow the steamer to heat up for approximately 30 seconds. The indicator light will turn on when the steamer is ready for use.
4. Steam the Garment: Hold the steamer vertically and gently glide it over the fabric, allowing the steam to penetrate the fibers. For best results, keep the steamer moving in an up and down or side to side motion.
5. Turn Off and Unplug: After you have finished steaming, turn off the steamer and unplug it from the power outlet.
It's important to note that the XUJXHH AN-1 steamer has a continuous steam function that can be activated using a lock button. This allows for up to 15 minutes of uninterrupted steaming without having to hold down the trigger. To activate the continuous steam function, refer to the user manual for specific instructions.
Remember to follow the care and maintenance instructions provided in the manual to ensure the longevity of your steamer. Regularly clean the water tank to prevent mineral buildup and descale the steamer every few months if needed.
If you have any further questions or encounter any issues with your XUJXHH AN-1 1500W Travel Garment Steamer, you can reach out to the customer support team via email at support@xujxhh.com or by phone at +1 (800) 123-4567.
Add New Comment