User Manual Q&AAnswer
Dec 22, 2024 - 03:52 AM
Adjusting the pressure on the HTVRONT HPM10 T-shirt Press Machine is a simple process. Here are the steps to follow:
1. Start by turning on the machine and allowing it to heat up to the desired temperature.
2. Once the machine has reached the desired temperature, locate the pressure adjustment xxxx . It is usually located on the top of the machine near the handle.
3. To increase the pressure, turn the xxxx clockwise. To decrease the pressure, turn the xxxx counterclockwise.
4. It is important to adjust the pressure based on the type and thickness of the fabric you are using. Thicker fabrics may require more pressure, while thinner fabrics may require less.
5. It is recommended to do a test press on a scrap piece of fabric before applying the heat transfer vinyl (HTV) to your final project. This will allow you to determine if the pressure is set correctly.
6. If the pressure is too high, you may notice that the HTV does not adhere properly or that the fabric becomes distorted. If the pressure is too low, the HTV may not transfer fully or may peel off easily.
7. Adjust the pressure as needed until you achieve the desired results.
Remember to always follow the manufacturer's instructions and recommendations for the specific type of fabric and heat transfer vinyl you are using.
Add New Comment