User Manual Q&AAnswer
Dec 22, 2024 - 03:51 AM
Adjusting the temperature and time settings on the Slendor HP290 5-IN-1 Heat Press Machine is easy. Here are the step-by-step instructions:
1. Power on the machine by plugging it into a power source and turning it on.
2. The machine features a digital display that shows the current temperature and time settings. Use the control buttons located near the display to navigate and make adjustments.
3. To set the temperature, press the temperature button on the control panel. The current temperature setting will be displayed. Use the up and down arrows to increase or decrease the temperature as needed. The temperature can be adjusted in both Fahrenheit and Celsius.
4. To set the time, press the time button on the control panel. The current time setting will be displayed. Use the up and down arrows to increase or decrease the time as needed. The time can be adjusted in seconds, minutes, or hours, depending on the project requirements.
5. Once you have set the desired temperature and time, wait for the machine to preheat to the set temperature. The digital display will show the current temperature as it heats up.
6. When the machine has reached the set temperature, it is ready for use. Place your garment or item on the lower platen and position the transfer paper or design as needed.
7. Lower the handle to engage the press and start the timer. The digital display will show the remaining time as the press is active.
8. Once the timer finishes, lift the handle to release the pressure and stop the heat transfer process.
9. Carefully remove the pressed item from the machine and allow it to cool before handling.
Remember to always follow the recommended temperature and time settings for the specific material you are working with to achieve optimal results.
Add New Comment