User Manual Q&AAnswer
Dec 22, 2024 - 03:32 AM
To adjust the temperature and time settings on the F2C T31 5-in-1 Pro Heat Press Machine, follow these steps:
1. Press the "SET" key on the control panel. The LED screen labeled "H1" will display "SP," indicating the current temperature setting.
2. Use the ▼ or ▲ keys to adjust the temperature to your desired setting. Please note that you should check the controller setting for Celsius or Fahrenheit degree readings before setting the temperature.
3. Press the "SET" key again. The LED screen labeled "H1" will display " ," indicating the setting for the heating time.
4. Use the ▼ or ▲ keys to adjust the time to your desired setting.
5. Once you have set the temperature and time, the machine will start heating up. The temperature rise time is typically 5-15 minutes.
6. When the machine reaches the set temperature, place your item with the transfer image into the machine and close the handle.
7. The timer will start counting down. When the timer reaches "0," the machine will alert you with a buzzer sound, indicating that the transfer is complete.
8. Release the handle and carefully remove the printed object from the machine.
Please refer to the F2C T31 5-in-1 Pro Heat Press Machine Instruction Manual for more detailed instructions and safety precautions.
Add New Comment