User Manual Q&AAnswer
Dec 22, 2024 - 03:26 AM
Adjusting the pressure on the Seeutek BZ-1513 heat press machine is easy. Here's how you can do it:
1. Locate the pressure adjustment xxxx on the machine. It is usually located on the top or side of the heat press.
2. Turn the xxxx clockwise to increase the pressure or counterclockwise to decrease the pressure. Start with a lower pressure setting and gradually increase it until you achieve the desired results.
3. When adjusting the pressure, consider the thickness of the material you are working with. Thicker materials may require more pressure, while thinner materials may need less pressure to avoid damage.
4. Test the pressure by pressing down on the handle. If it feels too loose or too tight, make further adjustments until you find the right balance.
Remember to always test the pressure on a scrap piece of material before applying it to your actual project. This will help you determine the ideal pressure for your specific needs.
Add New Comment