User Manual Q&AAnswer
Dec 22, 2024 - 03:25 AM
Adjusting the pressure on the is a simple process. Here are the step-by-step instructions:
1. Power on the machine and wait for it to reach the desired temperature.
2. Locate the pressure adjustment xxxx or lever on the machine. This is usually located on the top or side of the heat press.
3. Turn the xxxx clockwise to increase the pressure or counterclockwise to decrease the pressure. If your machine has a lever, move it up or down to adjust the pressure.
4. Test the pressure by closing the top heating plate onto the lower heating plate. If the pressure feels too light or too heavy, continue adjusting the xxxx or lever until you achieve the desired pressure.
5. Once you have adjusted the pressure to your liking, you can proceed with your heat transfer project.
Note: It is important to adjust the pressure based on the thickness and type of material you are using. Too much pressure can cause the material to be flattened or damaged, while too little pressure may result in incomplete transfers. It is recommended to refer to the user manual or the manufacturer's guidelines for specific pressure recommendations for different materials.
If you have any further questions or need additional assistance, please refer to the Konduone HP-V2 Heat Press Machine user manual or contact the customer support provided in the manual.
Add New Comment