User Manual Q&AAnswer
Dec 22, 2024 - 02:35 AM
Adjusting the pressure on the HTVRONT SG-RYJ-0044 Auto Heat Press Machine is a simple process. Here are the step-by-step instructions:
1. Start by turning on the heat press machine and allowing it to heat up to the desired temperature.
2. Once the machine has reached the desired temperature, locate the pressure xxxx on the top of the machine. It is usually located near the handle.
3. To increase the pressure, turn the xxxx clockwise. To decrease the pressure, turn the xxxx counterclockwise.
4. Adjust the pressure gradually and test it by closing the heat press handle. If the pressure is too light, the material may not adhere properly. If the pressure is too heavy, it may cause the material to be flattened or distorted.
5. Continue adjusting the pressure until you achieve the desired amount of pressure for your specific project.
Note: It is important to adjust the pressure according to the thickness of the material you are using. Thicker materials may require more pressure, while thinner materials may require less pressure.
For more detailed instructions and safety precautions, please refer to the user manual provided with the HTVRONT SG-RYJ-0044 Auto Heat Press Machine.
Add New Comment