User Manual Q&AAnswer
Dec 22, 2024 - 02:29 AM
To adjust the pressure on the PowerPress PW15x15, follow these steps:
1. Make sure the machine is turned off and the panel is open.
2. Locate the pressure adjustment xxxx , which is usually located on the top of the machine near the handle.
3. Turn the pressure adjustment xxxx clockwise to increase the pressure on the heating panel.
4. Test the pressure by trying to lift the handle (control arm) with one hand. You should feel a certain level of resistance.
5. If the pressure is too high and you are unable to lift the handle easily, turn the pressure adjustment xxxx counterclockwise to decrease the pressure.
6. Repeat steps 3-5 until you achieve the desired pressure setting.
Note: It may take a few tries to find the right pressure setting for different materials. Adjust the pressure based on the thickness of the material you are using to ensure proper heat transfer.
For more detailed instructions and illustrations, please refer to the PowerPress PW15x15 Digital Heat Press Machine User Manual.
Add New Comment