User Manual Q&AAnswer
Dec 22, 2024 - 02:27 AM
Adjusting the pressure on the VIVOHOME VH952US 11-in-1 Heat Press is a simple process. Here are the steps to follow:
1. Locate the pressure adjustment xxxx : The pressure adjustment xxxx is usually located on the top of the heat press, near the handle.
2. Turn the xxxx clockwise or counterclockwise: To increase the pressure, turn the xxxx clockwise. To decrease the pressure, turn the xxxx counterclockwise. Start with a lower pressure setting and gradually increase it until you achieve the desired result.
3. Test the pressure: Before applying the heat press to your material, it's a good idea to test the pressure on a scrap piece of fabric or material. This will help you determine if the pressure is too high or too low for your specific application.
4. Make adjustments as needed: If the pressure is too high and the material is being flattened or damaged, decrease the pressure by turning the xxxx counterclockwise. If the pressure is too low and the transfer is not adhering properly, increase the pressure by turning the xxxx clockwise.
5. Repeat the process for different materials: Different materials may require different pressure settings. It's important to adjust the pressure accordingly for each material to achieve the best results.
Please refer to the user manual for more detailed instructions and illustrations on how to adjust the pressure on the VIVOHOME VH952US 11-in-1 Heat Press.
Add New Comment