User Manual Q&AAnswer
Dec 22, 2024 - 02:25 AM
To set up the Prince Lionheart 9002 Premium Wipes Warmer, follow these steps:
1. Fill the Ever-Fresh pillow with clean water: Remove the Ever-Fresh pillow from its package and saturate it with water. This pillow is designed to circulate moisture within the warmer and keep the wipes moist and fresh. It needs to be replaced every 3 months for optimal effectiveness.
2. Place the Ever-Fresh pillow in the base of the Wipes Warmer: Position the saturated Ever-Fresh pillow in the base of the Wipes Warmer. If your model comes with a Pillow Case or Water Reservoir, place the saturated Ever-Fresh pillow into the Case or Reservoir before positioning it within the base of the Wipes Warmer.
3. Add the wipes: Remove the wipes from their original packaging and lift the lid of the Wipes Warmer. Drop in a stack of baby wipes, approximately 80-100 wipes or enough to allow the lid to completely close. For proper dispensing of pop-up wipes, make sure to place them with the correct side up as noted on the wipes packaging.
4. Plug in the unit: Plug the Wipes Warmer into a standard 110-240V wall outlet. The power indicator light will be on when the unit is functioning properly, and the warming process will begin.
5. Allow time to reach full temperature: It typically takes about 3 hours for the wipes to reach a comfortable temperature, depending on the room temperature. During this time, the Ever-Fresh System will circulate moisture within the warmer, ensuring the wipes remain moist and free from browning.
Once the Prince Lionheart 9002 Premium Wipes Warmer is set up, it will keep the wipes warm and ready for use. Remember to replace the Ever-Fresh pillow every 3 months and rinse/saturate it regularly to maintain maximum moisture retention.
Add New Comment