User Manual Q&AAnswer
Dec 22, 2024 - 01:58 AM
Connecting the Norwii N76 Laser Point Remote Click to your computer or device is a simple process. Here are the step-by-step instructions:
1. Insert the USB Receiver: Locate the USB receiver included in the package. Insert the USB receiver into an available USB port on your computer or device.
2. Turn on the Device: Slide the power switch on the Norwii N76 Laser Point Remote Click to the 'ON' position. The device should power on and establish a connection with the USB receiver.
3. Verify Connection: Once the device is turned on, it should automatically connect to the USB receiver. You can verify the connection by checking if the laser pointer is functioning and if the buttons on the remote clicker are responsive.
Note: The Norwii N76 Laser Point Remote Click uses a plug-and-play USB receiver, which means no additional software installation is required. The device is compatible with multiple operating systems, including Windows, Mac OS, Linux, and Android.
If you encounter any issues with the connection, such as the device not responding or the USB receiver not being recognized, try the following troubleshooting steps:
- Re-insert the USB receiver into a different USB port on your computer or device.
- Restart your computer or device and try connecting again.
- Ensure there are no obstructions or interference between the remote clicker and the USB receiver.
- Check the compatibility of the device with your specific operating system and update any necessary software.
If the issue persists, you can refer to the user manual provided with the Norwii N76 Laser Point Remote Click or contact NinjaABXY Customer Service at support@ninjaabxy.com or call 1-800-555-0199 for further assistance.
Add New Comment