User Manual Q&AAnswer
Dec 22, 2024 - 01:53 AM
To pair the CLIKBUTM WP08-R Wireless USB Remote with the USB receiver, please follow these steps:
1. Insert Batteries: Open the battery compartment on the remote and insert the two AAA batteries provided.
2. Connect USB Receiver: Plug the USB receiver into an available USB port on your computer. Make sure the USB receiver is securely connected.
3. Pairing: The remote will automatically pair with the USB receiver. If it doesn't pair automatically, you can press the pairing button located inside the battery compartment of the remote. Press and hold the pairing button for a few seconds until the LED indicator on the remote and the USB receiver start flashing.
4. Wait for Pairing: Wait for a few seconds while the remote and USB receiver complete the pairing process. Once the pairing is successful, the LED indicator on both the remote and the USB receiver will stop flashing and remain solid.
5. Test the Connection: To ensure the pairing is successful, test the connection by using the remote to navigate through presentations, control media playback, or perform any desired actions.
Note: If you experience any issues with pairing, make sure the batteries are inserted correctly in the remote, and ensure that you are within the wireless range of up to 100 feet from the USB receiver.
For further assistance or troubleshooting, refer to the user manual or contact the customer support of Shenzhen Quro Electronic Technology Co., Ltd.
Add New Comment