User Manual Q&AAnswer
Dec 22, 2024 - 01:10 AM
To set the countdown on the FCXJTU Digital Countdown Days Timer Clock, follow these steps:
1. Press the SET button to enter the day countdown timer mode.
2. Hold the SET button until the day digit flashes. This indicates that you are in the setting mode.
3. Use the "+" button to increase the value and the "-" button to decrease the value. Start by setting the number of days you want to countdown from.
4. Press the SET button to move to the next setting, which is hours.
5. Again, use the "+" and "-" buttons to set the desired number of hours.
6. Repeat this process for minutes and seconds, pressing the SET button to move to each setting and using the "+" and "-" buttons to adjust the values.
7. Once you have set the desired countdown time, press the ST/SP button to start the countdown.
8. To pause the countdown, press the ST/SP button again. You can pause and resume the countdown as needed.
9. If you want to clear the countdown and start over, pause the countdown and then press the "+" and "-" buttons at the same time. This will reset the countdown to zero.
Please refer to the user manual for more detailed instructions and illustrations.
Add New Comment