User Manual Q&AAnswer
Dec 22, 2024 - 12:18 AM
To change the time on the Mooas MT-C1 Cube Time Management Timer, please follow these steps:
1. Locate the power switch at the bottom of the product.
2. Ensure the timer is turned off by placing the switch to the "OFF" position.
3. Flip the timer to the desired time interval. The available time intervals are indicated on each side of the cube.
4. Once you have set the desired time interval, place the timer on a flat surface with the side displaying the selected time interval facing up.
5. Turn on the timer by placing the switch to either the "LO" (low alarm sound) or "HI" (high alarm sound) position.
6. The timer will start counting down from the selected time interval, and the remaining time will be displayed on the LED screen at the bottom of the product.
7. When the time is up, an alarm will ring to notify you.
Note: If you wish to change the time while the timer is running, simply flip the timer to the desired time interval again, and it will reset and start counting down from the new time.
For more detailed instructions and information, please refer to the user manual provided with your Mooas MT-C1 Cube Time Management Timer.
Add New Comment