User Manual Q&AAnswer
Dec 22, 2024 - 12:09 AM
To install the batteries in the SENLMLER LED Light Ear Tweezers, please follow these steps:
1. Remove the Cap: Unscrew the cap at the end of the tweezers to access the battery compartment.
2. Insert the Batteries: Place the batteries into the compartment with the correct polarity. Ensure the flat side (negative) is in contact with the spring and the positive side is facing outward.
3. Replace the Cap: xxxx the cap back on tightly to secure the batteries in place.
Visual Instructions:
- The first image in the manual shows the user unscrewing the cap from the end of the tweezers.
- The second image illustrates placing the batteries into the compartment, ensuring the correct polarity (negative side in contact with the spring).
- The third image demonstrates screwing the cap back onto the tweezers to secure the batteries.
Please refer to the manual for visual representations of these steps.
If you have any further questions or need additional assistance, please feel free to contact SENLMLER customer support at the provided phone number or WhatsApp.
Add New Comment