User Manual Q&AAnswer
Dec 21, 2024 - 11:57 PM
To charge your device using the iWALK LPE002 Power Bank, please follow these steps:
1. Take the iWALK LPE002 Power Bank out of the box along with any other items that came with it.
2. Check the power bank and the USB-C to USB-C cable for any damage or defects.
3. Place the power bank on a flat surface, such as a table or countertop.
4. Connect one end of the USB-C to USB-C cable to the power bank's USB-C port.
5. Plug the other end of the USB-C to USB-C cable into your device's charging port.
6. Ensure that the power bank has sufficient charge by checking the LED indicator lights. If the lights are not on, charge the power bank using a compatible USB-C wall charger.
7. Once the power bank is charged, press the power button on the power bank to start charging your device.
8. Monitor the charging progress by checking the LED indicator lights on the power bank. The lights will indicate the remaining power level of the power bank.
9. Once your device is fully charged, disconnect it from the power bank by unplugging the USB-C to USB-C cable.
10. To conserve power, turn off the power bank by pressing and holding the power button until the LED indicator lights turn off.
Note: Make sure to use a high-quality USB-C wall charger that provides sufficient power (5V2A or higher is suggested) to charge the power bank and your device effectively.
Add New Comment