User Manual Q&AAnswer
Dec 21, 2024 - 11:56 PM
To replace the batteries in the Little Kids Light and Musical Bubble Wand, follow these steps:
1. Locate the battery compartment on the back of the wand. It should have a small cover that can be opened.
2. Use your fingers or a small screwdriver to gently pry open the battery cover.
3. Inside the battery compartment, you will see slots for three AAA batteries. Take note of the correct orientation for the batteries (positive and negative ends).
4. Remove the old batteries from the slots by pushing them out or pulling them out with your fingers.
5. Insert three fresh AAA batteries into the slots, making sure to align the positive and negative ends correctly.
6. Close the battery compartment cover securely to ensure the batteries stay in place.
7. Test the wand by pressing the on/off button to see if the lights, music, and bubble production are working properly.
Please refer to the "Setup Guide" section of the user manual for visual instructions and additional tips on battery replacement.
Add New Comment