User Manual Q&AAnswer
Dec 21, 2024 - 11:56 PM
To charge the AquaVault AV10 Power Bank for the first time, follow these steps:
1. Unbox the ChargeCard: Take the AquaVault AV10 ChargeCard out of its box.
2. Check the Charger: Make sure the charger is in good shape and that all of the cords that come with it are still connected.
3. First Charge: Before you use the ChargeCard for the first time, plug it into a power source to fully charge it.
4. Check Power Levels: To make sure the ChargeCard is fully charged, look at the LED power lights.
5. Connect Device: Based on the port on your device, pick the right built-in cord (Lightning, USB-C, or Micro USB).
6. Plug the cable you picked into your device and press the power button if you need to. This will start charging.
7. Monitor Charge: The LED lights on the ChargeCard let you see how much power is left in the battery.
8. Charged Your Device: Make sure your device is connected safely and charged correctly.
9. Remove: When your device is fully charged or the ChargeCard's battery is almost dead, remove the cord from your device.
10. Plug the ChargeCard back into a power source to charge it again after use.
Please refer to the AquaVault AV10 Power Bank User Manual for more detailed instructions and troubleshooting tips.
Add New Comment