User Manual Q&AAnswer
Dec 21, 2024 - 10:46 PM
To activate the sound feature on the Haktoys 1002C Sound-Activated Singing Bird, please follow these steps:
1. Find the on/off switch located on the bird. It is usually located on the bottom or side of the bird.
2. Flip the switch to the "on" position.
3. Once the bird is turned on, it will be in sound-activated mode.
4. The bird will start chirping and moving its wings when it detects sound or noise.
5. To test the sound activation feature, try talking or making noise near the bird to see how it responds.
6. Make sure the bird is placed in an area where it can easily hear sounds for optimal activation.
Note: If the bird is not responding to sound, check the batteries to ensure they are properly inserted and have sufficient charge. Also, make sure the sound-activation feature is enabled and try speaking or clapping close to the bird to trigger a response.
For more detailed instructions and troubleshooting tips, please refer to the Haktoys 1002C Sound-Activated Singing Bird User Manual.
Add New Comment