User Manual Q&AAnswer
Dec 21, 2024 - 10:24 PM
To set up the Smtcsl X27 Wireless Charging Station, follow these steps:
1. Take the PD 20W charger and wireless charging station out of the box.
2. Find a flat and stable surface near a power outlet to place the charging stand.
3. Plug in the PD 20W adapter into a wall outlet.
4. Connect the USB Type-C wire from the adapter to the USB-C port on the charging station.
5. Check if the charging station is turned on by looking for the LED light.
6. Position your iPhone, Apple Watch, and AirPods on the charging stand to start charging.
7. Ensure that your devices are compatible with the charging station (iPhones need MagSafe, and AirPods need the right case).
8. Check the LED light to confirm that each gadget is charging properly.
9. If charging doesn't begin, make sure your devices are aligned correctly with the charge coils.
10. To use the power bank feature, press the button on top to turn on the 5000mAh battery pack before charging on the go.
11. Monitor the energy level of the power bank using the LED screen before unplugging.
12. When the power bank is low, use the PD 20W adapter to connect it to a plug outlet and recharge it.
13. Once your devices are fully charged, remove them from the charging station to avoid overcharging.
14. Clean the charging station periodically with a dry cloth to remove dust and dirt.
15. Store the charging station in a cool, dry place when not in use to maintain its performance.
For more detailed instructions, refer to the "Setup Guide" section of the Smtcsl X27 Wireless Charging Station user manual.
Add New Comment